TerraDrain® Sheet 50 Series

TerraDrain® Sheet 50 Series prefabricated drains are constructed using a formed polystyrene core with a nonwoven filter fabric bonded to one side. The filter fabric is bonded to each dimple to prevent soil intrusion into the core flow channels while allowing water to freely enter the drain core. The core provides an uninterrupted path for water to flow to designated drainage exits.

TerraDrain® Sheet 50 Series is an economical solution for sub-surface, single-sided drainage applications requiring moderate strength and flow capacity. TerraDrain® Sheet 50 Series products are available with filter fabrics meeting AASHTO M 288-06 specifications.


English Values

All values provided are intended for rapid comparison purposes, only. Please refer to a specific product’s Product Data Sheet (PDS) and the disclaimers therein for a detailed listing of all characteristics, associated definitions and values needed for structure design, specification compliance review and product submittal purposes. Please Download PDS for all information transfer, printing and submittal purposes.

Property Test Method Units TerraDrain® Sheet 50 TerraDrain® Sheet 54 TerraDrain® Sheet 56 TerraDrain® Sheet 58

Fabric

Material 1
PP PP PP PP
Water Flow Rate
ASTM D4491 Lpm/m2 7743 6113 4483 3668
Grab Tensile Strength
ASTM D4632 kN 0.400 0.578 0.712 0.912
CBR Puncture Resistance
ASTM D6241 kN 1.00 1.55 2.00 2.66
Apparent Opening Size
ASTM D4571 mm 0.297 0.210 0.210 0.177
Permittivity
ASTM D4491 sec-1 2.8 2.1 1.8 1.3
Grab Elongation
ASTM D4632 % 65 70 70 70
UV Resistance
ASTM D4355 % @ 500 hrs 70 70 70 70
AASHTO M 288-06 3
Survivability Class 3 Class 2 Class 1

Core

Material 1
HIPS HIPS HIPS HIPS
Thickness
ASTM D1777 mm 6.35 6.35 6.35 6.35
Compressive Strength
ASTM D1621 kPa 527 527 527 527
Flow Rate 2
ASTM D4716 Lpm/m 155 155 155 155
Product Data Sheets

  • 1   PP = Polypropylene; HIPS = High Impact Polystyrene
  • 2   In-plane flow rate measured at 3,600 psf (172 kPa) compressive load and a hydraulic gradient of 1.0.
  • 3   AASHTO Designation: M 288-06 Standard Specification for Highway Applications; American Association of State Highway and Transportation Officials, 2006. Geotextile survivability classification from installation stresses in subsurface drainage applications.