Railroad

Geosynthetic products are used in railroads to provide filtration, separation, and reinforcement under ballast. AREMA typically requires needle punch nonwoven geotextiles for this application; however, Hanes Geo also offers a range of geogrids for ballast and sub-ballast reinforcement.

TerraTex® nonwoven geotextiles are made up of polypropylene fibers. These fibers are needled to form a stable and durable network such that the fibers retain their relative position. It is non-biodegradable and resistant to most soil chemicals, acids, and alkali with a pH range of 3 to 12. Unless noted otherwise, all values are minimum average roll values (MARV).

Railroad Specifications
PropertyTest MethodEnglishUnit (Metric Unit)TerraTex® GE110TerraTex® GE112TerraTex® GE116
Weight (Typical)1ASTM D5261oz/sy (g/m2)10.0 (334)12.0 (407)16.0 (543)
Grab TensileASTM D4632lbs (kN)175 (0.775)225 (1.000)350 (1.555)
Grab ElongationASTM D4632% (%)20 (20)20 (20)20 (20)
Trapezoid TearASTM D4533lbs (kN)100 (0.444)125 (0.555)150 (0.665)
Pin Puncture ResistanceASTM D4833lbs (kN)110 (0.485)150 (0.665)185 (0.820)
Mullen BurstASTM D3786psi (kPa)400 (2,750)450 (3,100)620 (4,270)
Permittivity1ASTM D4491sec-1 (sec-1)0.30 (0.30)0.25 (0.25)0.20 (0.20)
Permeability1ASTM D4491cm/sec (cm/sec)0.10 (0.10)0.10 (0.10)0.10 (0.10)
Water Flow Rate1ASTM D4491gpm/sf (Lpm/m2)50 (50)50 (50)50 (50)
AOS1 2ASTM D4751US Std. Sieve (mm)70 (0.212)70 (0.212)70 (0.212)
Planar Transmissivity3ASTM D4761sf/min (m2/sec)0.002 (0.0000031)0.004 (0.0000062)0.006 (0.0000093)
Abrasion Resistance Strength RetainedASTM D4886% (%)80 (80)80 (80)80 (80)
UV ResistanceASTM D4355% @ 500 hrs (% @ 500 hrs)70 (70)70 (70)70 (70)
Product Data SheetsDownload TerraTex® GE110 Apples PDSDownload TerraTex® GE112 Apples PDSDownload TerraTex® GE116 Apples PDS
  1. At the time of manufacturing. Handling, storage, and shipping may change these properties.
  2. Value represents maximum average roll value.
  3. Transmissivity is measured at Gradient 1.0 and 3.5 psi load with 15-minute seating time between steel plates.